Swab Antigen Home Test Kit 1 TESTS / KIT

CERTIFICATION:CE

TEST TIME: 15 minutes

SPECIMEN: Nasal; Oropharyngeal

PAYMENT: T/T

MOQ:3000 boxes

INTENDED PURPOSE:

Suitable for the qualitative detection of novel antigen in human nasal and pharyngeal swab samples to assist in the diagnosis of suspected novel infection.

PRODUCT FEATURES:

•Convenient operation, no need for professional instruments and personnel, available for testing at home.

•Test results can be read in 15 minutes , It can be stored at room temperature from 4℃ to 30℃, and it is easy to transport at room temperature.

•High-quality, high-affinity monoclonal matched antibody pairs, testing the specificity of the virus.

•Valid for up to 24 months in storage.

PRODUCT PARAMETERS:

1 TESTS / KIT

1、Pharyngeal / nasal swabs

2、Antigen detection cards

3、Antigen extract tube

4、Directions

Storage conditions & period of validity:

1.Store at 4°C-30°C, and it is valid for 24 months.

2.After the aluminum foil bag is unsealed, the test card should be used as soon as possible within one hour.

Specimen request:

1.Throat swab: Let the patient's head tiltslightly, mouth open, and make "ah" sounds, exposing the pharyngeal tonsils on both sides. Hold the swab and wipe the pharyngeal tonsils on both sides of the patient with a lttle hard back and forth at least 3 times; place the swab specimen in the Antigen extraction tube with the Antigen extract R1 added in advance, rotate the swab for about 10 seconds, and press the swab head against the wall to release the antigen in the swab.

2.Nasal swab: Let the patient's head relax naturally, and slowly rotate the swab against the wall of the nostril into the patient's nostril to the nasal palate, and then slowly remove it while wiping. Using the same swab, wipe the other nostril in the same way, place the swab specimen in the Antigen extraction tube with the Antigen extract R1 added in advance, rotate the swab for about 10 seconds, and press the swab head against the wall to release the antigen in the swab.

Test methods:

The test method was colloidal gold. Please read the manual and the instrument operation manual carefully before use.

1.Open the package , take out the test card and place it on a clean and stable surface.

2.After collecting the swab sample with the sterile swab provided, unscrew the bottle cap ① of the Antigen extraction tube botletht contains the Antigen extract R1 and insert the sample swab.

3.Put the swab specimen into the Antigen extaction tube, rotate the swab for about 10 seconds, and press the swab hed against the tube wall to release the antigen in the swab. Squeeze the swab over the head to remove the swab so as to remove as much liquid as posstile from the swab. Dispose of swabs a cording to biohazard waste disposal method.

4.Screw the bottle cap ① on the Antigen extraction tube.

5.Unscrew the bottle cap ② and put 2 drops into the specimen hole of the test card, and start the timer.

6.Read the resuts within 10-15 mimutes. Strong positive results can be reported within 15 minutes, however, negative resuls must be repoted after 15 minmtes and theresults after 30 minutes are no longer valid.

Interpretation of test results:

Negative result: If theve is only a qualty control line C, the dection line is colorles indicating that novel antigen has not been detected and the result is negative.

Positive result: if both the quality control line C and the detection line appear, antigen has been detected and the result is positive for antigen.

lnvalid result: If the quality control line C is not observed, it wil be invalid regardless of whether there is deteoion line (as shown in the figure below), and the test shall be conducted again.

Contact Us:

*if you did not receive our reply within 24hrs, please resend to our alternative email: [email protected], or call +86-181.5100.0009 directly.